DTC B2477

Configuration error.

DETECTION CONDITION

• Keyless control module configuration has not been performed correctly.

POSSIBLE CAUSE

• Keyless control module configuration error.

• Malfunction in the keyless control module internal circuit

STEP

INSPECTION

ACTION

1

• Perform keyless control module configuration.

• Is B2477 displayed?

Yes

Replace the keyless control module and perform the resetting procedure for the advanced keyless system when replacing the keyless control module.

(See KEYLESS CONTROL MODULE REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM].)

(See CARD KEY ID CODE REGISTRATION [ADVANCED KEYLESS SYSTEM])

(See STEERING LOCK UNIT ID CODE REGISTRATION [ADVANCED KEYLESS SYSTEM])

(See KEYLESS CONTROL MODULE CONFIGURATION [ADVANCED KEYLESS SYSTEM])

(See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [ADVANCED KEYLESS SYSTEM])

(See SECURITY ACCESS PROCEDURE [ADVANCED KEYLESS SYSTEM])

No

• Go to the next step.

2

• Clear the DTC from the memory.

• Is any DTC displayed?

Yes

Go to the applicable DTC inspection.

No

DTC troubleshooting completed.