1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
Select “Body”.
Select “Security”.
When using the PDS (Pocket PC)
Select “Programming”.
Select ”PATS Functions”.
3. Select the items to be performed from the following:
Program Additional card key
Card Key Code Erase and Program
Steering Lock Unit Programming
Program additional ignition key (with immobilizer system)
Ignition Key Code Erase and Program (with immobilizer system)
Customer Spare Key Programming Enable (with immobilizer system)
Customer Spare Key Programming Disable (with immobilizer system)
4. The security access begins and the M-MDS displays the “OUT-CODE”.NOTE:
When “OUT-CODE” is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the “OUT-CODE”.
5. Input “IN-CODE” corresponding to “OUT-CODE” displayed on the M-MDS screen.
6. If the security access is successful, selected item can be performed.