2008 - MX-5 - Body and Accessories

FRONT FENDER PANEL REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (SeeBATTERY REMOVAL/INSTALLATION [LF].)

2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)

3. Remove the front combination lights. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

4. Remove the side step molding. (SeeSIDE STEP MOLDING REMOVAL.) (SeeSIDE STEP MOLDING INSTALLATION.)

5. Remove in the order indicated in the table.

1	Fastener
2	Bolt A
3	Bolt B
4	Bolt C
5	Bolt D
6	Front fender panel

6. Install in the reverse order of removal.