SECURITY LIGHT: 22

Communication error between the instrument cluster and the PCM (data transfer error)

DTC: B2141/P1260

DETECTION CONDITION

• Communication error between the instrument cluster and the PCM (data transfer error)

POSSIBLE CAUSE

• Malfunction in the wiring harness (CAN line) between the instrument cluster and the PCM

• Instrument cluster malfunction

• PCM malfunction

STEP

INSPECTION

ACTION

1

VERIFY DTC

• Are either U1900 or U0073, or both displayed, by either the instrument cluster or the PCM, or both?

Yes

Perform troubleshooting according to the corresponding DTC inspection.

(See DTC U0073, U2516 [MULTIPLEX COMMUNICATION SYSTEM].)

No

Go to the next step.

2

VERIFY DTC

• Using the registered key, turn the ignition switch to the ON position.

• Is the DTC displayed?

• Security light: 22

• M-MDS: B2141/P1260

Yes

• Replace the PCM and perform the resetting procedure for the immobilizer system when replacing the PCM.

  (See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [KEYLESS ENTRY SYSTEM].)

• Go to the next step.

No

DTC troubleshooting completed.

3

EXAMINE INSTRUMENT CLUSTER AND PCM

• Is the DTC displayed again?

• Security light: 22

• M-MDS: B2141/P1260

Yes

• Replace the instrument cluster and perform the resetting procedure for the immobilizer system when replacing the instrument cluster.

  (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

  (See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [KEYLESS ENTRY SYSTEM].)

• Go to the next step.

No

DTC troubleshooting completed.

4

EXAMINE PCM

• Is the DTC displayed again?

• Security light: 22

• M-MDS: B2141/P1260

Yes

• Replace the PCM and perform the resetting procedure for the immobilizer system when replacing the PCM.

  (See PCM REMOVAL/INSTALLATION [LF].)

  (See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [KEYLESS ENTRY SYSTEM].)

No

DTC troubleshooting completed.