5

DOOR GLASS STOPS BEFORE FULLY OPENING/

POSSIBLE CAUSE

• Power window main switch malfunction

• Power window motor malfunction

• Battery malfunction (Low voltage)

• Door glass improper installation

• Keyless entry system signal reception error (outside operation area, radio signal interference)

STEP

INSPECTION

ACTION

1

• Operate the door glass in auto/manual by operating the power window main switch.

• Does the door glass stop before fully opening/closing using either operation?

Yes

Inspect the following parts, and repair or replace.

• Power window main switch

  (See POWER WINDOW MAIN SWITCH INSPECTION.)

  (See POWER WINDOW MAIN SWITCH INSPECTION[POWER RETRACTABLE HARDTOP].)

• Power window motor (See POWER WINDOW MOTOR INSPECTION.)

• Battery (Low voltage)

• Door glass (Installation condition)

No

Go to the next step.

2

• Open the door glass by operating the transmitter.

• Does the door glass stop before fully opening?

Yes

Inspect the following parts, and repair or replace.

• Keyless control module

  (See KEYLESS CONTROL MODULE INSPECTION[ADVANCED KEYLESS SYSTEM].)

  (See KEYLESS CONTROL MODULE INSPECTION[KEYLESS ENTRY SYSTEM].)

• Keyless entry system signal reception error (outside operation area, radio signal interference.)

No

Reinspect for malfunction recurrence. If the malfunction is not corrected, repeat the procedure from step 1.