SECURITY LIGHT: 16

Communication error between the instrument cluster and the PCM (no response)

DTC: U2510/P1260

DETECTION CONDITION

Communication error between the instrument cluster and the PCM (no response)

POSSIBLE CAUSE

• Malfunction in the wiring harness (CAN line) between the instrument cluster and the PCM

• PCM malfunction

• Instrument cluster malfunction

STEP

INSPECTION

ACTION

1

VERIFY DTC

• Are either U0073, or both, displayed, by either the instrument cluster or the PCM, or both?

Yes

Perform troubleshooting according to the corresponding DTC inspection.

(See DTC U0073, U2516 [MULTIPLEX COMMUNICATION SYSTEM].)

No

Replace the instrument cluster and perform the resetting procedure for the immobilizer system when replacing the instrument cluster.

(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

(See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [KEYLESS ENTRY SYSTEM].)

Go to the next step.

2

VERIFY DTC

• Using the registered key, turn the ignition switch to the ON position.

• Is the DTC displayed?

• Security light: 16

• M-MDS: U2510 /P1260

Yes

Replace the PCM and perform the resetting procedure for the immobilizer system when replacing the PCM.

(See PCM REMOVAL/INSTALLATION [LF].)

(See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [KEYLESS ENTRY SYSTEM].)

No

DTC troubleshooting completed.