2008 - MX-5 - Restraints

SEAT TRACK POSITION SENSOR REMOVAL/INSTALLATION

1. Turn the ignition switch to the LOCK position.

2. Remove the battery cover.

3. Disconnect the negative battery cable and wait for 1 min or more. (See BATTERY REMOVAL/INSTALLATION [LF].)

4. Remove the driver’s seat. (See SEAT REMOVAL/INSTALLATION.)

5. Detach the tab as shown in the figure and remove the connector from the seat connector.

6. Remove in the order indicated in the table.

1	Screw
2	Seat track position sensor (See Seat Track Position Sensor Installation Note.)

7. Install in the reverse order of removal.

Seat Track Position Sensor Installation Note

• Verify that the seat track position sensor is not contacting the metal plate.