CAUTION:
If any of the following work is performed, perform the seat weight sensor calibration using the M-MDS.
Replacement with a new seat weight sensor
Replacement with a new seat weight sensor control module
Replacement with new passenger-side seat parts
Disassembly of the passenger-side seat
If any of the following work is performed, perform the seat weight sensor inspection using the M-MDS. (See SEAT WEIGHT SENSOR INSPECTION.)
Removal of the passenger-side seat
Loosening and retightening of passenger’s seat fixing bolts
Or, the vehicle is involved in a collision
1. Have two 20 kg {44 lb} weights ready to use.
2. Connect the M-MDS to the DLC-2.
3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
Select “Body”.
Select “Restraints”.
When using the PDS (Pocket PC)
Select “All Tests and Calibrations”.
4. Then, select item from the screen menu in the following order.
Select “Passenger Seat Weight Sensor ReZero”.
5. Perform calibration following the procedures on the M-MDS screen.