2008 - MX-5 - Engine

KNOCK SENSOR (KS) REMOVAL/INSTALLATION [LF]

1. Remove the battery cover.

2. Remove the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)

3. Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF].)

4. Disconnect the KS connector.

5. Remove the KS installation bolt, then remove the KS.

6. Install in the reverse order of removal.

KS tightening torque

• 16—24 N·m {1.7—2.4 kgf·m, 12—17 ft·lbf}