NOTE:
Double‐sided adhesive tape has already been attached to the new rear door garnish.
WARNING:
Using a razor with bare hands can cause injury. Always wear gloves when using a razor.
1. When installing a new B-pillar upper trim, follow the procedure below:a. Remove the adhesive remaining on the body using razor.b. Remove any grease or dirt from the adhesion surface of the body.
2. When reusing the B-pillar upper trim, follow the procedure below:a. Remove the adhesive remaining on the B-pillar upper trim and the body using a razor.b. Remove any grease or dirt from the adhesion surface of the B-pillar upper trim and the body.c. Apply primer to the bonding area of the B-pillar upper trim.d. Attach double‐sided adhesive tape to the B-pillar upper trim as shown.
NOTE:
Use 3M GT7108 double-sided adhesive tape or equivalent.
3. Peel off the backing of the double‐sided adhesive tape, then install the B-pillar upper trim to the detachable hardtop.