10

CD player does not play the audio data (CDDA)

Possible DTC:10:Er02, 22:Er02

Troubleshooting hints

• CD-R/RW write format is out of specification

• Defective CD-R/RW (e.g., dirty CD, scratch)

• MP3 applicable CD player is malfunctioning

• Data other than audio data is in CD-R/RW

NOTE:

• The CD player may not play the CD-R/RW properly due to the disc condition.

• If there are MP3-formatted files and audio data on the same disc, the CD player loads and plays the first session of the data only.

STEP

INSPECTION

ACTION

1

• Replace with an audio-CD known to be operational.

• Does the CD player play the audio-CD properly?

Yes

Go to the next step.

No

Replace the audio unit.

(See CENTER PANEL UNIT REMOVAL/INSTALLATION.)

(See CENTER PANEL UNIT DISASSEMBLY/ASSEMBLY.)

(See AUDIO UNIT DISASSEMBLY/ASSEMBLY.)

2

• Inspect the write format of the recorded data on the CD-R/RW.

• Is the write format correct?

Yes

Go to the next step.

No

Write the CD-R/RW to the correct specification.

3

• Inspect the recorded data in the CD-R/RW.

• Is any data other than the audio data recorded on the CD-R/RW?

Yes

Replace with a CD-R/RW known to be operational (record audio data only), then inspect the CD player operation.

If the CD-R/RW plays:

• Audio system is normal. Explain to the customer that the CD player does not operate properly if audio data or other data are recorded on the CD-R/RW.

If the CD-R/RW does not play:

• Replace the audio unit.

  (See CENTER PANEL UNIT REMOVAL/INSTALLATION.)

  (See CENTER PANEL UNIT DISASSEMBLY/ASSEMBLY.)

  (See AUDIO UNIT DISASSEMBLY/ASSEMBLY.)

No

Go to the next step.

4

• Visually inspect the CD-R/RW.

• Is there any dirt or scratches on the CD-R/RW?

Yes

Clean the disc or replace it with an operational CD-R/RW.

No

Replace the audio unit.

(See CENTER PANEL UNIT REMOVAL/INSTALLATION.)

(See CENTER PANEL UNIT DISASSEMBLY/ASSEMBLY.)

(See AUDIO UNIT DISASSEMBLY/ASSEMBLY.)