26

Starter does not work

DESCRIPTION

• Starter does not work even when in P or N position.

POSSIBLE CAUSE

• Selector lever mis-adjustment

• Manual shaft malfunction

• TR switch malfunction

• TR switch mis-adjustment

• Transmission operates in fail-safe function (Starter lock system related circuit open or short)

• Immobilizer system operating or system malfunction.

STEP

INSPECTION

ACTION

1

• Inspect selector lever, TR switch and manual shaft positions.

• Are these position normal?

Yes

Go to the next step.

No

Adjust the suspect part position.

2

• Inspect the TR switch.

  (See TRANSMISSION RANGE (TR) SWITCH INSPECTION [SJ6A-EL].)

• Is the TR switch normal?

Yes

Go to engine system troubleshooting No.3 “WILL NOT CRANK” troubleshooting procedure.

No

Replace the TR switch.

(See TRANSMISSION RANGE (TR) SWITCH REMOVAL/INSTALLATION [SJ6A-EL]

3

• Verify test results.

• If normal, return to the diagnostic index to service any additional symptoms.

• If malfunction remains, inspect the related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.

• If the vehicle is repaired, troubleshooting completed.

• If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM.