2008 - MX-5 - Engine

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REMOVAL/INSTALLATION [LF]

1. Remove the battery cover.

2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF])

3. Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF].)

4. Remove the MAP sensor.

5. Install in the reverse order of removal.

• MAP sensor tightening torque

• 2.7—3.7 N·m {28—37 kgf·cm, 24—32 in·lbf}