|
Electric current |
A (ampere) |
Torque |
N·m (Newton meter) |
|
|
Electric power |
W (watt) |
kgf·m (kilogram force meter) |
||
|
Electric resistance |
ohm |
kgf·cm (kilogram force centimeter) |
||
|
Electric voltage |
V (volt) |
ft·lbf (foot pound force) |
||
|
Length |
mm (millimeter) |
in·lbf (inch pound force) |
||
|
in (inch) |
Volume |
L (liter) |
||
|
Negative pressure |
kPa (kilo pascal) |
US gal (U.S. gallon) |
||
|
mmHg (millimeters of mercury) |
US qt (U.S. quart) |
|||
|
inHg (inches of mercury) |
Imp gal (Imperial gallon) |
|||
|
Positive pressure |
kPa (kilo pascal) |
Imp qt (Imperial quart) |
||
|
kgf/cm2 (kilogram force per square centimeter) |
ml (milliliter) |
|||
|
cc (cubic centimeter) |
||||
|
cu in (cubic inch) |
||||
|
psi (pounds per square inch) |
fl oz (fluid ounce) |
|||
|
Number of revolutions |
rpm (revolutions per minute) |
Weight |
N (newton) |
|
|
g (gram) |
||||
|
oz (ounce) |
All numerical values in this manual are based on SI units. Numbers shown in conventional units are converted from these values.
Converted values are rounded off to the same number of places as the SI unit value. For example, if the SI unit value is 17.2 and the value after conversion is 37.84, the converted value will be rounded off to 37.8.
When the data indicates upper and lower limits, the converted values are rounded down if the SI unit value is an upper limit and rounded up if the SI unit value is a lower limit. Therefore, converted values for the same SI unit value may differ after conversion. For example, consider 2.7 kgf/cm2 in the following specifications: