1. Apply battery positive voltage and connect the ground to deck panel motor terminals A and E, and then inspect the deck panel motor operation.
If the deck panel motor does not operate as indicated in the table, replace it.
If the deck panel motor temperature is high, the motor may not rotate due to the motor internal PTC function. Leave it untouched for about 3 min to cool it down, then reinspect.
2. Connect the battery positive voltage to deck panel motor terminal D and connect terminal F to ground.
3. Operate the deck panel motor and measure the voltage at terminal B.
If there is any malfunction, replace the deck panel motor.
Terminal C is not used for the system control.
Pulse: max. 13 V/min. 0 V