Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

INSTRUMENT CLUSTER REMOVAL/INSTALLATION

CAUTION:

1. Perform the instrument cluster configuration when replacing it. (See INSTRUMENT CLUSTER CONFIGURATION.)
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF])
3. Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION.)
4. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION.)
5. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION.)
6. Remove in the order indicated in the table.



1

Screw

2

Instrument cluster

(See Instrument Cluster Removal Note.)

3

Clip A

4

Connector

5

Clip B

(See Clip B Removal Note.)


7. Install in the reverse order of removal.
8. When replacing the instrument cluster of vehicles with the immobilizer system, perform the following procedure:

CAUTION:

Instrument Cluster Removal Note

1. Rotate the instrument cluster in the direction of the arrow and remove the instrument cluster.

Clip B Removal Note

1. Rotate the clip B 90°, then remove the clip B from the instrument cluster.



< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.