Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

WASHER HOSE REMOVAL/INSTALLATION

1. Remove the wiper arm and blade.(See WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
2. Disconnect joint pipe A, then remove washer hose A from clip.

3. Remove the cowl grille.(See COWL GRILLE REMOVAL/INSTALLATION.)
4. Remove clip.
5. Disconnect joint pipe B, then remove washer hose A.
6. Disconnect washer hose B from the washer nozzle, then remove washer hose B.
7. Disconnect joint pipe C, then remove washer hose C.
8. Remove washer hose D from clips.
9. Disconnect washer hose D from the washer nozzle, then remove washer hose D.
10. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.