Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

WIPER ARM AND BLADE REMOVAL/INSTALLATION

1. Remove in the order indicated in the table.



1

Cap

2

Nut

3

Wiper arm

(See Wiper Arm Installation Note.)

4

Wiper blade

5

Rubber brush

6

Backing plate


2. Install in the reverse order of removal.
3. Adjust the wiper arm and blade.(See WIPER ARM AND BLADE ADJUSTMENT.)

Wiper Arm Installation Note

1. Clean the wiper arm connector shafts using a wire brush before installing the wiper arms.



< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.