Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

HEADLIGHT BULB REMOVAL/INSTALLATION

Low-beam

Halogen type
1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the washer tank. (RH) (See WASHER TANK REMOVAL/INSTALLATION.)
4. Remove the fasteners. (LH)

5. Slightly bent back the mudguard.
6. Disconnect the connector.

CAUTION:

7. Remove the cover.
8. Remove the socket, then remove the headlight bulb.
9. Install in the reverse order of removal.
Discharge type

WARNING:

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the washer tank. (RH) (See WASHER TANK REMOVAL/INSTALLATION.)
4. Remove the fasteners. (LH)

5. Slightly bent back the mudguard.
6. Remove the cover.

CAUTION:

7. Remove the connector, then remove the discharge headlight bulb.
8. Install in the reverse order of removal.

High-beam

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Disconnect the connector.

CAUTION:

4. Remove the socket, then remove the headlight bulb.
5. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.