Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Loosen the starter installation bolts only enough that the starter is loose, but not removed.(P66M-D)

(See STARTER REMOVAL/INSTALLATION [LF].)

4. Remove the transmission.(P66M-D)(See TRANSMISSION REMOVAL/INSTALLATION [P66M-D].)
5. Remove in the order indicated in the table.



1

Connector

2

Back-up light switch


6. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.