Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

SEAT BACK BAR LOWER GARNISH REMOVAL/INSTALLATION

Except Power Retractable Hardtop

1. Remove the following parts:
a. Console (See CONSOLE REMOVAL/INSTALLATION.)
b. Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION.)
c. Scuff plate (SCUFF PLATE REMOVAL/INSTALLATION.)
d. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
e. Aeroboard (See AEROBOARD REMOVAL/INSTALLATION.)
f. Seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION.)
g. Back trim (See BACK TRIM REMOVAL/INSTALLATION.)
2. Remove the fasteners.

3. Slide the seat back bar lower garnish to the vehicle rear and detach clips A and pin B.
4. Remove the seat back bar lower garnish.
5. Install in the reverse order of removal.

Power Retractable hardtop

1. Remove the following parts:
a. Console (See CONSOLE REMOVAL/INSTALLATION.)
b. Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION.)
c. Scuff plate (SCUFF PLATE REMOVAL/INSTALLATION.)
d. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
e. Aeroboard (See AEROBOARD REMOVAL/INSTALLATION.)
f. Seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION.)
g. Back trim (See BACK TRIM REMOVAL/INSTALLATION.)
h. Roof hook (See ROOF HOOK REMOVAL/INSTALLATION.)
2. Remove the clip A.

3. Remove the roof stopper.
4. Remove the fasteners.

5. Slide the seat back bar lower garnish to the vehicle rear and detach clips B and pin C.
6. Remove the seat back bar lower garnish.
7. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.