Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

VENTILATOR GRILLE REMOVAL/INSTALLATION

Driver’s Side

1. Remove the decoration panel. (driver’s side) (See DECORATION PANEL REMOVAL/INSTALLATION.)
2. Remove the screws.

3. Remove the ventilator grille.
4. Install in the reverse order of removal.

Passenger’s Side

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION.)
4. Remove the center panel unit. (See CENTER PANEL UNIT REMOVAL/INSTALLATION.)
5. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
6. Remove the decoration panel. (passenger’s side) (See DECORATION PANEL REMOVAL/INSTALLATION.)
7. Remove the screws.

8. Remove the ventilator grille.
9. Install in the reverse order of removal.

Center

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION.)
4. Remove the center panel unit. (See CENTER PANEL UNIT REMOVAL/INSTALLATION.)
5. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
6. Remove the decoration panel. (passenger’s side) (See DECORATION PANEL REMOVAL/INSTALLATION.)
7. Remove the screws.

8. Remove the ventilator grille.
9. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.