Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

A-PILLAR TRIM REMOVAL/INSTALLATION

1. Remove the female wedge. (See CONVERTIBLE TOP DISASSEMBLY/ASSEMBLY.)
2. Pull the A-pillar trim, then disengage clips A and B.

3. Pull the A‚Äźpillar trim upward, then disengage tabs C from the body.
4. Remove the A-pillar trim.
5. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.