Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

SHOCK ABSORBING PAD REMOVAL/INSTALLATION [DETACHABLE HARDTOP]

1. Remove the detachable hardtop.
2. Remove the following parts:
a. B-pillar garnish (See DETACHABLE HARDTOP DISASSEMBLY/ASSEMBLY.)
b. Side lock (See DETACHABLE HARDTOP DISASSEMBLY/ASSEMBLY.)
c. B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL [DETACHABLE HARDTOP], B-PILLAR UPPER TRIM INSTALLATION [DETACHABLE HARDTOP].)
d. Male wedge cover (See DETACHABLE HARDTOP DISASSEMBLY/ASSEMBLY.)
e. Top lock cover (See DETACHABLE HARDTOP DISASSEMBLY/ASSEMBLY.)
f. Headliner (See HEADLINER REMOVAL/INSTALLATION [DETACHABLE HARDTOP].)
3. Pull the shock absorbing pad rearward and detach clips A.

4. Remove the shock-absorbing pad.
5. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.