Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

DECK PANEL MOTOR REMOVAL/INSTALLATION

CAUTION:

1. Fully open the deck panel.
2. Remove the battery cover.
3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
4. Set the side shelf out of the way. (See SIDE SHELF REMOVAL/INSTALLATION.)
5. Remove the deck panel. (See DECK PANEL REMOVAL/INSTALLATION.)
6. Remove the screws indicated in the figure.

7. Remove the deck panel motor.
8. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.