Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

SPLASH SHIELD REMOVAL/INSTALLATION

Splash Shield A

1. Remove the bolts.

2. Remove the fasteners at section A shown in the figure.
3. Install in the reverse order of removal.

Splash Shield B

1. Remove the front suspension tower bar. (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION.)
2. Remove the splash shield A. (See Splash Shield A.)
3. Remove the front shock absorber and coil spring. (See FRONT SHOCK ABSORBER AND COIL SPRING REMOVAL/INSTALLATION.)
4. Remove the fasteners at section A shown in the figure.
5. Remove the splash shield B.

6. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.