Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

EXTRACTOR CHAMBER REMOVAL/INSTALLATION

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the rear combination light. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)
4. Remove clip A using a fastener remover and then remove the extractor chamber from the vehicle.

5. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.