Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

TRUNK KEY CYLINDER REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM]

1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION.)
3. Detach the rod.
4. Remove the nuts, then remove the trunk key cylinder.

5. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.