Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

TRUNK LID OPENER REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM]

1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION.)
3. Detach the rod.
4. Disconnect the trunk lid opener connector and the trunk compartment light connector.

5. Remove the bolts, then remove the trunk lid opener.
6. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.