Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

KEYLESS RECEIVER INSPECTION [ADVANCED KEYLESS SYSTEM]

1. Measure the voltage or inspect for continuity according to the Terminal Voltage Table (Reference).

Terminal Voltage Table (Reference)



Terminal

Signal name

Connected to

Measured condition

Voltage (V)/Continuity

Inspection item(s)

A

Power supply

Keyless control module

Under any condition

B+

  • Keyless control module

  • Related wiring harnesses

C

Data

Keyless control module

Under any condition: Inspect the wiring harness between the keyless receiver and keyless control module terminal 3U for continuity.

Continuity detected

  • Keyless control module

  • Related wiring harnesses

E

GND

Body ground

Under any condition: Inspect for continuity to ground.

Continuity detected

GND




< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.