Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

STEERING LOCK UNIT ID CODE REGISTRATION [ADVANCED KEYLESS SYSTEM]

CAUTION:

NOTE:

1. Bring the programmed card key into the vehicle.
2. Fully lower the driver-side door glass.
3. Connect the M-MDS to the DLC-2.

4. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
5. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
6. Then, select items from the screen menu in the following order.
a. Select “PATS Functions“
b. Select “Steering Lock Unit Programming“
7. Perform the security access according to the directions on the M-MDS screen. (See SECURITY ACCESS PROCEDURE[ADVANCED KEYLESS SYSTEM].)
8. The security access begins and the M-MDS displays “OUT-CODE“.

NOTE:

9. Input the “IN-CODE“ that corresponds to the “OUT-CODE“ displayed on the M-MDS screen.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.