Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

CARD KEY ID CODE REGISTRATION [ADVANCED KEYLESS SYSTEM]

CAUTION:

NOTE:

With two programmed card keys

1. Bring the programmed card keys (2) and a unprogrammed card key into the vehicle.
2. Close all doors.
3. Insert the supplementary key into the ignition key cylinder.

NOTE:

4. Turn the ignition switch to the ON position.
5. Press the UNLOCK button on card key 1.
6. Press the UNLOCK button on card key 2.
7. From the ignition switch in the ON position, switch the ignition switch in the order indicated below.
8. Open the driver-side front door, press the door switch twice, and then close the door.

NOTE:

9. Press the UNLOCK button on the unprogrammed card key twice.

NOTE:

10. If programming more card keys, remove the supplementary key once, and then repeat the procedure from Step 2.

Using M-MDS

1. Fully lower the driver-side door glass.
2. Connect the M-MDS to the DLC-2.

3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.

CAUTION:

4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
5. Then, select items from the screen menu in the following order.
6. Security access begins and the M-MDS displays the “OUT-CODE“.

NOTE:

7. Input the “IN-CODE“ that corresponds to the “OUT-CODE “ displayed on the M-MDS screen.
8. Select “CARD KEY PROGRAMMING“ from the M-MDS screen menu.

NOTE:

9. Press the unprogrammed card key UNLOCK button twice.

NOTE:

10. If programming more card keys, remove the supplementary key once, and then repeat the procedure from Step 7 by following the instructions on the M-MDS screen.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.