Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

KEYLESS CONTROL MODULE REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM]

NOTE:

1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
2. Remove the side panel. (See SIDE PANEL REMOVAL/INSTALLATION.)
3. Remove the bolt and nut.

4. While inclining the keyless control module along the body panel in the direction indicated by the arrow, disengage the bracket tab from the hole in the body panel.
5. Disconnect the keyless control module connector.
6. Remove the keyless control module.
7. Remove the screw, then remove the bracket.

NOTE:

8. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.