Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM]

1. Remove in the order indicated in the table.



1

Connector

2

Hood latch

3

Hood release lever

(See Hood Release Lever Removal Note.)

4

Hood release cable


2. Install in the reverse order of removal.
3. Adjust the hood. (See HOOD ADJUSTMENT.)

Hood Release Lever Removal Note

1. Pull the lever.
2. While pushing the tab in the direction of the arrow using a tape-wrapped, small flathead screwdriver, detach it from the dashboard.

CAUTION:

3. Under the condition in Step 2, pull the hood release lever outward, then remove it from the dashboard.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.