Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

FUEL-FILLER LID OPENER REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM]

1. To remove the fuel-filler lid opener, remove the trunk side trim (LH). (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
2. When removing the fuel-filler lid opener lever and cable, perform the following procedure:
a. Remove the seats. (See SEAT REMOVAL/INSTALLATION.)
b. Remove the back trim. (See BACK TRIM REMOVAL/INSTALLATION.)
c. Remove the seat back bar lower garnish. (See SEAT BACK BAR LOWER GARNISH REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.



1

Lift spring

2

Fuel-filler lid opener

3

Fuel-filler lid opener lever

4

Fuel-filler lid opener cable


4. Install in the reverse order of removal.
5. Adjust the fuel-filler lid. (See FUEL-FILLER LID ADJUSTMENT.)


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.