Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

REAR WINDOW DEFROSTER FILAMENT REPAIR

1. Clean the rear window defroster filament using isopropyl alcohol.
2. Attach tape to both sides of the rear window defroster filament.

3. Using a small brush or marking pen, apply silver paint.
4. After 2—3 min, carefully remove the tape without damaging the applied area.

CAUTION:

5. Dry the repaired part using the following procedure.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.