Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

BASE INSTALLATION

1. Cut away all of the original sealant using a razor.

WARNING:

2. Clean and degrease the ceramic coating on the glass and the base.

CAUTION:

3. Apply primer to the bonding area of the glass and the base.
4. Use only glass primer on the glass, and body primer on the base. Allow the primer to dry for approx. 30 min.
5. Apply 3.0 mm {0.12  in} layer of sealant to the base.

6. Center the base in the ceramic coating and press it onto the glass.

7. Use isopropyl alcohol to remove any excess repair sealant. Hardening time of sealant

Temperature

Surface hardening time

Time required until vehicle can be put into service

5 °C {41 °F}

Approx. 1.5 h

Approx. 12 h

20 °C {68 °F}

Approx. 1 h

Approx. 4 h

35 °C {95 °F}

Approx. 10 min.

Approx. 2 h


8. Install the rearview mirror.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.