Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

FRONT DOOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.(SeeBATTERY REMOVAL/INSTALLATION [LF].)
2. To remove the door stay (checker), remove the following parts:
a. Door trim (See DOOR TRIM REMOVAL/INSTALLATION.)
b. Door speaker (See DOOR SPEAKER REMOVAL/INSTALLATION.)
3. To remove the door hinges, remove the following parts:
a. Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)
b. Front combination lights (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
c. Side step molding (See SIDE STEP MOLDING REMOVAL.) (See SIDE STEP MOLDING INSTALLATION.)
d. Mad guard
e. Front fender panel (See FRONT FENDER PANEL REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Adjust the door. (See DOOR ADJUSTMENT.)



1

Connector

(See Connector Removal Note.)

2

Bolt A

3

Bolt B

4

Door

5

Nut

6

Door stay (checker)

7

Bolt C

8

Door hinge


Connector Removal Note

1. Pull down the lever in the direction indicated by the arrow and disconnect the connector.



< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.