Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

HOOD REMOVAL/INSTALLATION

WARNING:

1. Disconnect the negative battery cable. (SeeBATTERY REMOVAL/INSTALLATION [LF].)
2. To remove the hood hinge, remove the following parts:
a. Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)
b. Front combination lights (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
c. Side step molding (SeeSIDE STEP MOLDING REMOVAL.) (SeeSIDE STEP MOLDING INSTALLATION.)
d. Front fender panel (See FRONT FENDER PANEL REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.



1

Hood insulator

2

Shroud seal weatherstrip

3

Cushion rubber

4

Hood

5

Hood hinge

6

Hood striker

7

Hood stay


4. Install in the reverse order of removal.
5. Adjust the hood. (See HOOD ADJUSTMENT.)


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.