Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

FRONT FENDER PANEL REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (SeeBATTERY REMOVAL/INSTALLATION [LF].)
2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
3. Remove the front combination lights. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
4. Remove the side step molding. (SeeSIDE STEP MOLDING REMOVAL.) (SeeSIDE STEP MOLDING INSTALLATION.)
5. Remove in the order indicated in the table.



1

Fastener

2

Bolt A

3

Bolt B

4

Bolt C

5

Bolt D

6

Front fender panel


6. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.