Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

FRONT BUMPER REINFORCEMENT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (SeeBATTERY REMOVAL/INSTALLATION [LF].)
2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
3. Remove the front combination light. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
4. Remove the fresh air duct. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF].)
5. Remove the horn. (See HORN REMOVAL/INSTALLATION.)
6. Remove in the order indicated in the table.



1

Clip

2

Shroud seal plate

3

Harness clip

4

Front bumper reinforcement


7. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.