Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

No.4 DOOR GLASS STOPS BEFORE FULLY OPENING [EXTERIOR OPEN FUNCTION]



5

DOOR GLASS STOPS BEFORE FULLY OPENING/

POSSIBLE CAUSE

  • Power window main switch malfunction

  • Power window motor malfunction

  • Battery malfunction (Low voltage)

  • Door glass improper installation

  • Keyless entry system signal reception error (outside operation area, radio signal interference)


Diagnostic Procedure

STEP

INSPECTION

ACTION

1

  • Operate the door glass in auto/manual by operating the power window main switch.

  • Does the door glass stop before fully opening/closing using either operation?

Yes

Inspect the following parts, and repair or replace.

No

Go to the next step.

2

  • Open the door glass by operating the transmitter.

  • Does the door glass stop before fully opening?

Yes

Inspect the following parts, and repair or replace.

No

Reinspect for malfunction recurrence. If the malfunction is not corrected, repeat the procedure from step 1.




< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.