Home

< Previous   Next >

2008 - MX-5 - Body and Accessories

DTC INSPECTION [IMMOBILIZER SYSTEM (ADVANCED KEYLESS SYSTEM)]

Security Light

1. Turn the ignition switch to the ON position.
2. Verify the security light state.
3. When any malfunction has been detected, read DTCs via flashing patterns displayed after the security light flashes or is illuminated for approx. 1 min.

NOTE:

M-MDS

1. Connect the M-MDS to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
3. Verify the DTC according to the directions on the screen.
4. After completion of repairs, clear all DTCs stored in the keyless control module. (See CLEARING DTC [IMMOBILIZER SYSTEM (ADVANCED KEYLESS SYSTEM)].)


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.