Home

< Previous   Next >

2008 - MX-5 - Restraints

BUCKLE REMOVAL/INSTALLATION

1. Turn the ignition switch to the LOCK position.
2. Remove the battery cover.
3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
4. Remove the seat. (See SEAT REMOVAL/INSTALLATION.)
5. Detach the tab as shown in the figure and remove the connector from the seat connector.

6. Remove in the order indicated in the table.



1

Bolt

2

Buckle


7. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.