Home

< Previous   Next >

2008 - MX-5 - Restraints

PASSENGER AIR BAG DEACTIVATION (PAD) SWITCH REMOVAL/INSTALLATION

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the side panel. (See SIDE PANEL REMOVAL/INSTALLATION.)
4. Disconnect the connector.
5. Remove the PAD switch.

6. Install in the reverse order of removal.
7. Turn the ignition switch to the ON position.
8. Verify that the air bag system warning light illuminates for approx. 6 s and goes out.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.