Home

< Previous   Next >

2008 - MX-5 - Restraints

SEAT TRACK POSITION SENSOR REMOVAL/INSTALLATION

1. Turn the ignition switch to the LOCK position.
2. Remove the battery cover.
3. Disconnect the negative battery cable and wait for 1 min or more. (See BATTERY REMOVAL/INSTALLATION [LF].)
4. Remove the driver’s seat. (See SEAT REMOVAL/INSTALLATION.)
5. Detach the tab as shown in the figure and remove the connector from the seat connector.

6. Remove in the order indicated in the table.



1

Screw

2

Seat track position sensor

(See Seat Track Position Sensor Installation Note.)


7. Install in the reverse order of removal.

Seat Track Position Sensor Installation Note



< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.