1. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
2. Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
3. Remove the clock spring. (See CLOCK SPRING REMOVAL/INSTALLATION.)
4. Verify that the continuity is as indicated in the table.
If not as indicated in the table, replace the clock spring.
When the vehicle-side connector for the clock spring is disconnected, terminals 1A, 1B, 1C and 1D are shorted to prevent unexpected operation (deployment) of the air bag module.