Home

< Previous   Next >

2008 - MX-5 - Restraints

DTC B2477



DTC B2477

Configuration error

DETECTION CONDITION

WARNING:

  • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

  • SAS control module configuration has not been performed correctly.

POSSIBLE CAUSE

  • SAS control module configuration error

  • SAS control module malfunction


Diagnostic procedure

STEP

INSPECTION

ACTION

1

INSPECT SAS CONTROL MODULE
  • Using the M-MDS, perform SAS control module configuration.

  • Is DTC B2477 indicated?

Yes

Replace the SAS control module.

(See SAS CONTROL MODULE REMOVAL/INSTALLATION.)

No

DTC troubleshooting completed.




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.