Home

< Previous   Next >

2008 - MX-5 - HVAC

REFRIGERANT PRESSURE SWITCH REMOVAL/INSTALLATION

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Discharge the refrigerant from the system. (See REFRIGERANT CHARGING.)
4. Remove in the order indicated in the table.



1

Refrigerant pressure switch connector

2

Refrigerant pressure switch

(See Refrigerant Pressure Switch Installation Note.)


5. Install in the reverse order of removal.

Refrigerant Pressure Switch Installation Note

1. Apply compressor oil to the O-ring joints.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.