Home

< Previous   Next >

2008 - MX-5 - HVAC

A/C UNIT REMOVAL/INSTALLATION

1. Remove battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Discharge the refrigerant from the system. (See REFRIGERANT RECOVERY.) (See REFRIGERANT CHARGING.)
4. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [LF].)
5. Disconnect from A/C unit in the order in the table.

CAUTION:



1

Cooler pipe No.3 (LO)

(See REFRIGERANT LINE REMOVAL/INSTALLATION.)

(See REFRIGERANT LINE REMOVAL/INSTALLATION.)

2

Cooler pipe No.2 (HI)

(See REFRIGERANT LINE REMOVAL/INSTALLATION.)

(See REFRIGERANT LINE REMOVAL/INSTALLATION.)

3

Heater hose


6. Remove the A/C unit and air dist unit. (See AIR DIST UNIT REMOVAL/INSTALLATION.)
7. Disassembly the A/C unit as shown in the figure.

8. Install in the reverse order of removal.
9. Perform the refrigerant system performance test. (See REFRIGERANT SYSTEM PERFORMANCE TEST.)


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.